Samsung microSD not showing in Linux
from makingStuffForFun@lemmy.ml to linux@lemmy.ml on 16 Dec 02:39
https://lemmy.ml/post/23628071

Hi all,

I have an Intel NUC Skull Canyon. It’s running POP_OS!

I purchase a microSD card, and it came with an SD Adaptor.

I’ve plugged it in, but nothing shows in files.

I have run lsusb, lspci, and even:

sudo lsblk -o MODEL,NAME,FSTYPE,LABEL,MOUNTPOINT,SIZE

However it’s just not showing up anywhere.

The microSD is brand new, and a model called:

SAMSUNG 512 EVO Plus A2 V30.

I am not sure if the card is maybe so new, that linux can’t see it yet? I doubt that.

I wonder if anyone has any ideas? I don’t have another SD Adaptor, nor any other computer with an SD or microSD slot.

Thanks so muchy

#linux

threaded - newest

potentiallynotfelix@lemmy.fish on 16 Dec 03:01 next collapse

Does your SD card reader itself show up in lsusb? Does anything extra show up in /dev when plugging it in? It may be that there’s no partitions on the drive, so you don’t see any storage. Could also be either your reader or card not working, however. It would help to get another reader or card to test if your reader or card work.

cmnybo@discuss.tchncs.de on 16 Dec 03:37 next collapse

If the card reader is built in, it may show up as /dev/mmcblk0.

makingStuffForFun@lemmy.ml on 16 Dec 04:42 collapse

Thanks for your answer. It is built in, but that does not exist in my file system.

cmnybo@discuss.tchncs.de on 16 Dec 05:26 collapse

The reader may need a kernel module loaded. I have an old laptop with a built in Realtek PCIe card reader that requires the rtsx_pci_sdmmc module to be manually loaded.

If it is a PCIe card reader, it should have shown up in lspci even without the module loaded though.

Have you checked the BIOS settings to make sure it hasn’t been disabled there?

makingStuffForFun@lemmy.ml on 16 Dec 04:43 collapse

Thanks for the reply. It does not show up in lsusb as far as I can tell. Unplugging and pluging back in shows no difference in output. I will have to maybe test it in another machine. I’ll ask about. Thanks for your time

rudyharrelson@lemmy.radio on 16 Dec 03:22 next collapse

Does the device show up if you open Gparted? Maybe it needs to be formatted. Though I guess it’d still show up with ‘lsusb’ even if it needed formatting.

makingStuffForFun@lemmy.ml on 16 Dec 04:41 collapse

Thanks for the answer. No, nothing in Gparted, or Disks. Nothing in lsusb either.

frozenpopsicle@lemmy.dbzer0.com on 16 Dec 06:41 collapse

gnome-disks doesn’t see it?! that’s not good.

eldavi@lemmy.ml on 16 Dec 06:47 next collapse

In your shoes: I would run journalctl -f and then try plugging in your adapter and watch the logs scroll as you do it to catch for errors, failures, timeouts, or even if it detected anything at all .

IrritableOcelot@beehaw.org on 16 Dec 07:23 next collapse

Ive had similar issues on both windows and Linux, seems to be a hardware thing:

For some microSD adapters you specifically have to plug the SD card into the adapter before the adapter is plugged into the computer. I assume its something about the computer only registering a “new device” when the USB is plugged in.

racketlauncher831@lemmy.ml on 16 Dec 14:46 next collapse

Does anything show up in dmesg when you plug in the adaptor?

I read that you don’t have another adaptor or computer for debugging, but it’s equally sad that it’s most probably the best result you can get, knowing or not knowing what the root cause is. You literally need to test another adaptor, try another SD card, try a different USB port. Basically throw everything at the wall and see what sticks. It would work without technical knowledge eventually.

gnuhaut@lemmy.ml on 17 Dec 18:32 next collapse

My built-in SD card reader shows up in lspci as an “SD Host Controller”. Since lspci and lsusb should list everything that’s connected, it should show up there. If it’s not there, it is not connected, or idk, it’s broken maybe. Or it’s not listed with a name, just a number. I think the names come from some database of known devices. Maybe your SD card reader is a unicorn and nobody has ever seen it before and so it’s not in the database.

ArcaneSlime@lemmy.dbzer0.com on 18 Dec 19:10 collapse

I’ve had that happen with one of those exact same cards and it was a bad card, could be your issue too.